Raymarine forum / Raymarine Forums / Multifunction Displays v / Axiom 7 / MH3 - Fuel Tank content over 100% - can this je calibrated?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 7 / MH3 - Fuel Tank content over 100% - can this je calibrated?
05-10-18, 07:30 AM (This post was last modified: 05-11-18 02:55 PM by Chuck - Raymarine - Moderator.)
Post: #1
CptKalus Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2018
Reputation: 0
Axiom 7 / MH3 - Fuel Tank content over 100% - can this je calibrated?
Hello Folks,

I have an Axiom 7 updated to the latest LH3 Release. In all screens where the percentage of fuel on board is displayed it shows 106% with full tank.

Can this be calibrated to show 100% with full tank?

Kind regards,
Martin
Find all posts by this user
Quote this message in a reply
05-11-18, 02:53 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Axiom 7 / MH3 - Fuel Tank content over 100% - can this je calibrated?
Welcome to the Raymarine Forum Martin,

Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, Raymarine products will simply repeat the received data from third party NMEA 2000 devices.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication