Raymarine forum / Raymarine Forums / Autopilots v / [CA] AXIOM and P70r Shared Display

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AXIOM and P70r Shared Display
05-08-18, 09:35 PM (This post was last modified: 05-11-18 02:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
rfagundo Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2017
Reputation: 0
[CA] AXIOM and P70r Shared Display
I recently had a new Axiom 12 installed. I have I70s and and P70r. I have shared brightness control across i70s, but it does not control the p70r. Can you help?
Find all posts by this user
Quote this message in a reply
05-11-18, 02:32 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] AXIOM and P70r Shared Display
Welcome to the Raymarine Forum rfagundo,

It is recommended that you verify that each of the Raymarine devices within your system has been updated with the latest available Raymarine product software. If so, it is recommended that you ensure that each device has been assigned to the same Network Group (MENU->SET-UP->SYSTEM SETUP->NETWORK GROUP). After doing so, it will then be necessary to configure each device to synchronize brightness/color to the selected group (MENU->SET-UP->SYSTEM SETUP->BRIGHTNESS/COLOR GROUP->THIS GROUP->SYNC).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication