Raymarine forum / Raymarine Forums / Autopilots v / [CA] autopilot EV 200

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] autopilot EV 200
05-10-18, 12:24 PM (This post was last modified: 05-11-18 03:10 PM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 5
Joined: Jul 2016
Reputation: 0
[CA] autopilot EV 200
I had a old Navico 8000 autopilot with a hydraulic pump and cylinder.

The hydraulic parts works fine but ther computer course is broke.

I'm looking for a new autopilot and keeping my 12v hydraulic pump and cylinder.

Is the a EV200 autopilot is a good choice for that?

I have a 39 foot sailboat.
Find all posts by this user
Quote this message in a reply
05-11-18, 03:10 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] autopilot EV 200
Welcome to the Raymarine Forum Martin,

What is the flow rate in cc/min or cu.in./min of the currently installed hydraulic pump? What is the cubic capacity of the steering ram? What is the part number of the third party hydraulic pump?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication