Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Adapter for CP300 and B164 Transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Adapter for CP300 and B164 Transducer
05-03-19, 02:42 PM (This post was last modified: 05-06-19 02:46 PM by Chuck - Raymarine - Moderator.)
Post: #1
CoryB Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2018
Reputation: 0
[CA11] Adapter for CP300 and B164 Transducer
I have a new-to-me E-125 MFD and CP300 digital sonar module. My B164 transducer does not connect directly into the CP300. I need an adapter cable and cannot get the right part number. Can you please advise.

Thank you
Find all posts by this user
Quote this message in a reply
05-06-19, 02:59 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Adapter for CP300 and B164 Transducer
Welcome to the Raymarine Forum Cory,

As indicated within the FAQ found here, the product name B164 identifies a family of transducers rather than a single transducer, each of which is designed for a specific manufacturer and fishfinder or instrument product offered by that manufacturer. As such, the transducer's product ID(s) should be used in determining compatibility of the transducer with Raymarine's fishfinding products. If supplied with a photo of the transducer's tag which clearly shows all information printed on it, then we may be able to advise you on an adapter.
Find all posts by this user
Quote this message in a reply
06-12-19, 11:37 PM (This post was last modified: 06-13-19 08:05 AM by Chuck - Raymarine - Moderator.)
Post: #3
CoryB Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2018
Reputation: 0
RE: [CA11] Adapter for CP300 and B164 Transducer
Will do, Chuck. Sorry about the double post. I wasn't notified that this was responded to. Just made sure my subscription was correct this time
Find all posts by this user
Quote this message in a reply
06-13-19, 08:05 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Adapter for CP300 and B164 Transducer
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication