Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG11] M81137 rotary drive unit

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] M81137 rotary drive unit
07-09-19, 04:55 PM (This post was last modified: 07-16-19 11:22 AM by Derek - Raymarine - Moderator.)
Post: #1
johnspeetjens Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2019
Reputation: 0
[DG11] M81137 rotary drive unit
I'm interested in adapting a M81137 rotary drive unit to replace my original Neco 17Dr8 drive unit. Can anyone tell me the shaft diameter and length on the Raymarine DU? I was hoping to use the same chain and sprocket off of the Neco unit.
Thanks
Find all posts by this user
Quote this message in a reply
07-16-19, 11:23 AM (This post was last modified: 07-16-19 11:25 AM by Derek - Raymarine - Moderator.)
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] M81137 rotary drive unit
Hi johnspeetjens

Thankyou for your enquiry.

We have attached a pdf of the generic sprocket shaft and keyway details, please note this is for a standard 3/8" pith sprocket, whilst the sprocket details will change, the shaft dimensions remain unchanged.

You will need to check the correct reduction ratio is applied since the NECO drive will have a slower output shaft speed than the Raymarine drive.

Regards

Derek


Attached File(s)
.pdf  chain pitch and sprocket details.pdf (Size: 180.36 KB / Downloads: 530)
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication