Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST2000 + Dirve belt fell off

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST2000 + Dirve belt fell off
08-06-19, 01:26 PM (This post was last modified: 08-07-19 03:31 PM by Chuck - Raymarine - Moderator.)
Post: #1
thrustlegal Offline
Junior Member
**
 		Posts: 1
Joined: Aug 2019
Reputation: 0
[CA11] ST2000 + Dirve belt fell off
My drive belt fell off the motor. It looks like the motor drive gear is not lined up well with the large gear it should be driving. I'm planning to put new belts on but want to make sure I don't have a problem with the motor drive gear alignment before I do that. Can anyone please look at the picture and let me know if the gear alignment is OK or not? If not, do I need a new motor?

Thanks!
Find all posts by this user
Quote this message in a reply
08-07-19, 03:33 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST2000 + Dirve belt fell off
Welcome to the Raymarine Forum thrustlegal,

No photo was attached to your thread. Please click here to view a FAQ addressing how to add an attachment to a thread or post.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication