Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] VHF TO GPS

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] VHF TO GPS
09-10-19, 03:53 PM (This post was last modified: 09-11-19 11:47 AM by Chuck - Raymarine - Moderator.)
Post: #1
jaberwoky Offline
Junior Member
**
 		Posts: 3
Joined: Sep 2019
Reputation: 0
[CA11] VHF TO GPS
Hi I would like to connect my standard Horizon VHF radio to my Raymarine A78 combo unit do I have to have a sea-talk converter or can I connect the nmea wires which will be plugged in the Data socket on the back of my A78 and solder /connect to my gps out wire to my vhf in and gps in wire to my vhs out wire? or do I have to use a sea talk converter? cheers for looking
Find all posts by this user
Quote this message in a reply
09-11-19, 11:51 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] VHF TO GPS
Welcome to the Raymarine Forum jaberwoky,

Please note that a6x MFD and a7x MFDs do not have a NMEA 0183 communications interface. Those seeking to use the MFD to supply GPS data to a VHF radio would be advised to utilize the solution specified within the FAQ found here.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication