Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Rudder transducer to ITC-5 or ACU?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Rudder transducer to ITC-5 or ACU?
10-20-19, 10:26 PM (This post was last modified: 10-22-19 10:42 AM by Chuck - Raymarine - Moderator.)
Post: #1
LThomas Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2019
Reputation: 0
[CA11] Rudder transducer to ITC-5 or ACU?
I will be using an ITC-5 to connect wind and STW transducers to the STNG backbone. I note that it has a connection for a rudder transducer as well. Is there any preference between connecting the rudder sensor to the ITC-5 vs. connecting it to an ACU-200 directly? There will only be one rudder position sensor in the system.

Thanks much.
Find all posts by this user
Quote this message in a reply
10-22-19, 10:43 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Rudder transducer to ITC-5 or ACU?
Welcome to the Raymarine Forum LThomas,

Within systems featuring a Raymarine autopilot, the rudder reference transducer must be interfaced to the ACU or autopilot course computer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication