Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Tacktick MN 100-2 RESET DIGITAL

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Tacktick MN 100-2 RESET DIGITAL
10-25-19, 03:46 PM (This post was last modified: 10-28-19 03:28 PM by Chuck - Raymarine - Moderator.)
Post: #1
Busterpike Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2019
Reputation: 0
[CA11] Tacktick MN 100-2 RESET DIGITAL
Any tips for when the display says "RESET DIGITAL"?

Seems like the button's don't respond now ...
Find all posts by this user
Quote this message in a reply
10-28-19, 03:29 PM (This post was last modified: 10-28-19 03:30 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Tacktick MN 100-2 RESET DIGITAL
Welcome to the Raymarine Forum Busterpike,

The reported message is indicative of a circuity failure within the MN 100 requiring that it be sent into Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication