Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] CP 370 and thru hull trans

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] CP 370 and thru hull trans
10-29-19, 03:31 PM (This post was last modified: 10-30-19 12:04 PM by Chuck - Raymarine - Moderator.)
Post: #1
boatman41 Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2017
Reputation: 0
[CA11] CP 370 and thru hull trans
Installed cp 370 and b260 thru hull and the transducer will only pick up in shallow water. It is installed on a 28 Mc Keecraft any ideas ?
Find all posts by this user
Quote this message in a reply
10-30-19, 12:06 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] CP 370 and thru hull trans
Welcome to the Raymarine Forum boatman41,

At approximately what depth does the fishfinder lose bottom contact? Does the problem occur when the vessel is anchored or drifting? Does the problem occur when all other systems and engines are switched off?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication