Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] X10 course computer and ST8001

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] X10 course computer and ST8001
01-25-20, 04:11 PM (This post was last modified: 01-27-20 04:16 PM by Chuck - Raymarine - Moderator.)
Post: #1
gecsr1 Offline
Junior Member
**
 		Posts: 3
Joined: Sep 2019
Reputation: 0
[CA11] X10 course computer and ST8001
Can I use a ST8001 control head with a X10 Smart Pilot course computer ?
Are they compatible ?
Find all posts by this user
Quote this message in a reply
01-27-20, 04:20 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] X10 course computer and ST8001
Welcome to the Raymarine Forum gecsr1

Q. Can I use a ST8001 control head with a X10 Smart Pilot course computer ?
A. Yes. The ST6xxx, ST7xxx, and ST8xxx legacy SeaTalk autpilot control heads are all compatible with the SPX autopilot course computers. The ST70 autopilot control head and the currently produced p70S/p70RS/p70/p70R autopilot control heads are also compatible with SPX autopilot course computers which have been updated with the latest available Raymarine product software update.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication