Raymarine forum / Raymarine Forums / Instruments v / Compass

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Compass
08-22-16, 02:22 PM
Post: #1
seeray96 Offline
Junior Member
**
 		Posts: 46
Joined: Jun 2016
Reputation: 0
Compass
I have a fluxgate compass connected to the S3 on My 1995 SeaRay. I also have a second (I think) compass, under the helm seat, that I am not sure where it's connected. Attached is a picture of the unit. Can anyone advise me what type it is?
Find all posts by this user
Quote this message in a reply
08-22-16, 03:43 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Compass
Welcome to the Raymarine Forum Seeray96,

The device listed within your photo is an ST80 Heading Sensor. The Raymarine Heading Sensor consists of an oil-filled sphere suspended in a custom built “swing bracket”, together with associated electronics.

The Heading Sensor transmits magnetic compass heading data to equipment that is NMEA 0183 compatible, such as radars, RayData displays, and RayPilot autopilot systems
Find all posts by this user
Quote this message in a reply
08-25-16, 08:21 AM
Post: #3
seeray96 Offline
Junior Member
**
 		Posts: 46
Joined: Jun 2016
Reputation: 0
RE: Compass
Thanks, Chuck. I'm not getting a heading reading om E120 databar, so I assume this compass is not connected. Looks like I'll have to find the cable end and get it to the mfd.
Find all posts by this user
Quote this message in a reply
08-25-16, 09:15 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Compass
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication