Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Sirius Weather Tide information
11-25-19, 12:39 PM (This post was last modified: 11-25-19 03:11 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Sirius Weather Tide information
I am using Lighthouse III (I don't think I have the latest version) and Sirius XM Weather thru SR 150, which offers a tide feature. When I choose TIDE I see the image shown in the attachment which seems to be frozen. If I press the arrow image nothing happens and I see nothing that depicts the direction or influence of the tide in a particular area.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
11-25-19, 04:05 PM
Post: #2
RE: [CA11] Sirius Weather Tide information
Welcome to the Raymarine Forum Mike,

Please note that SiriusXM Satellite Marine Weather does not include tide data. The latter must come from a Navionics or C-Map chart card within the system. More information on this subject may be found within Chapter 8.9: Tides mode of the LightHouse 3.11 Advanced Operation Instructions. Tides mode only permits one to animate the Tide and Current icons shown. The only interaction which one may have with the screen when in this mode is to press the onscreen play, pause, fast fwd, and fast reverse options. If you haven't already done so press the play button and then watch the current arrows and the magnitudes displayed within them change.
Find all posts by this user
Quote this message in a reply
01-02-20, 11:53 AM (This post was last modified: 01-02-20 12:47 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Sirius Weather Tide information
Chuck, Thanks for the clarifying that tide data is not associated with Sirius Weather . I can find nothing in Chapter 8.9 about tides. Only radar. (?)

Also, please clarify are you saying Navionics and C-map brands of charts include tide data but the charts that came loaded on Axion do not include tide data? -mike
Find all posts by this user
Quote this message in a reply
01-02-20, 01:26 PM
Post: #4
RE: [CA11] Sirius Weather Tide information
Mike,

Q1. I can find nothing in Chapter 8.9 about tides. Only radar. (?),
A1. It is possible that you may have been using a version of the LightHouse 3 Advanced Operation Instructions for an earlier LightHouse 3 software release. It is recommended that you click on the link provided within my initial response to view the LightHouse 3.11 Advanced Operation Instructions. You will find that Chapter 8.9 specifically addresses Tides mode.

Q2. Please clarify are you saying Navionics and C-map brands of charts include tide data but the charts that came loaded on Axion do not include tide data?
A2. Except for cartography featuring little detail (i.e. not meant for navigation) which is used by the system when ranged well out, Raymarine MFDs feature no pre-loaded cartography within the internal memory of the MFDs. Similarly, Raymarine MFDs feature no pre-loaded tide and current data. Like those of most other manufacturers, Raymarine's MFDs are entirely dependent upon a compatible chart card (Navionics chart card, C-Map chart card, LighHouse NC2 chart card, or microSD card which has populated with LightHouse Charts) to be present within the MFD's memory card reader (or one of the other networked MFDs within the system) or within a Remote Card Reader (RCR) which has been interfaced to a MFD. Navionics, C-Map, LightHouse, and LightHouse NC2 charts may be separately purchased for use with one's MFD. Please click here to view Raymarine's web page concerning the marine charts which may be used with Axiom/Axiom Pro/Axiom XL MFDs. Raymarine MFDs may be also bundled with LightHouse Charts, Navionics charts, or C-Map Charts. Of these only Navionics and C-Map Charts include tide & current data. LightHouse NC2 Charts, which may be separately purchased from an Authorized Raymarine Dealer, also included tide & current data.

Accordingly, to view the tide information discussed within Chapter 8.9: Tides mode of the LightHouse 3.11 Advanced Operation Instructions, a Navionics, C-Map, or LightHouse NC2 chart card must be present within the MFD's memory card reader or RCR, the settings of the Chart application page/pane being viewed must be configured to display the cartography setting (MENU->SETTINGS->CARTOGRAPHY) corresponding to the type of chart card being used, and the Chart view should be configured to Detailed (i.e. not Weather or Sonar if these options exist within the Menu).
Find all posts by this user
Quote this message in a reply
01-02-20, 03:56 PM (This post was last modified: 01-02-20 04:15 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] Sirius Weather Tide information
1. Yes, I was in the BASIC manual not the ADVANCE. All good now
2. I have the NOAA charts that came with the Axiom and understand that that product does not provide TIDE data.
3. Thanks for your help -mike t
Find all posts by this user
Quote this message in a reply
01-02-20, 04:15 PM
Post: #6
RE: [CA11] Sirius Weather Tide information
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)