Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected
12-03-19, 06:43 AM (This post was last modified: 12-05-19 05:08 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected
In the SeaTalkNG reference manual (81300-1) on page 6, there is this paragraph about limitations:

"If SeaTalkng and SeaTalk(1) products are used together, do NOT connect an NMEA2000 backbone, as this product combination could compromise the integrity of the NMEA2000 system."

I am not sure I understand this correctly. Does that mean that NMEA2000 devices cannot be connected to the SeaTalkNG backbone when, e.g., a SeaTalk to SeaTalkNG converter (E22158) is used?

The manual for the converter doesn't mention anything like that.
Find all posts by this user
Quote this message in a reply
12-05-19, 05:16 AM
Post: #2
RE: [LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected
Dear svdlinden,

The use of ST1 products networked with a STng system is fine as long as networked correctly.

The manual needs updating, this is referring to the earlier days of STng. I will get this attended to.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)