Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] HD Radar Connectors
12-09-19, 02:12 AM (This post was last modified: 12-09-19 05:38 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] HD Radar Connectors
I Have a Raymarine HD Digital Radar and I need to replace the connector for cable attachment to the radar as well as the connector to the high speed switch. Do you have part numbers?
Find all posts by this user
Quote this message in a reply
12-09-19, 05:45 PM (This post was last modified: 12-09-19 05:46 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] HD Radar Connectors
Welcome to the Raymarine Forum Undercutter,

Unfortunately, Raymarine does not offer replacement plugs for Digital Radar Cables. Should radome/pedestal end of the Digital Radar Cable have failed, then the Digital Radar Cable must be replaced. The RayNet Ethernet plug of a Digital Radar Cable, may be replaced by splicing the cable to any Raymarine RayNet Cable or RayNet Adapter featuring a RayNet (F) plug on one end. Similarly, RJ54 Ethernet plug of a Digital Radar Cable, may be replaced by installing new and commonly available shielded RJ45 plug onto the cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)