MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] Feedback request on proposed SeaTalkNg on Regal 3560


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Feedback request on proposed SeaTalkNg on Regal 3560
12-19-19, 01:02 PM (This post was last modified: 12-20-19 10:51 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Feedback request on proposed SeaTalkNg on Regal 3560
Could use some help in validating my proposed network install on my 2005 Regal 3560. Attached is my proposed network layout. If anyone can validate or point out issues, I would be very grateful! (This will be my first Nema2k install).

I think most of it is pretty straight forward, but I definitely have questions around the SeaTalk to SeaTalkNg connections. Like..

1) Will the SeaTalk 1 devices pull power from the SeaTalkNg backbone or will they need seperate 12v power

2) Will this setup allow my SeaTalkNg/Nema2k network to see and use the data from the two SeaTalk 1 devices (Depth and Rudder sensor).

Thanks for any help!

John


Attached File(s)
.pdf  SeaTalkNg_Regal_3560.pdf (Size: 747.87 KB / Downloads: 38)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Feedback request on proposed SeaTalkNg on Regal 3560 - jstadick - 12-19-19 01:02 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)