Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] VHF DSC NMEA0183 data to STNG via AIS650?
12-30-19, 12:12 PM (This post was last modified: 12-30-19 01:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] VHF DSC NMEA0183 data to STNG via AIS650?
Can you please tell me if VHF DSC data presented on the NMEA0183 input port on the AIS650 gets transmitted on the AIS650 STNG port so it can be picked up by my Axiom9 MFD? Thank you.
Find all posts by this user
Quote this message in a reply
12-30-19, 01:44 PM
Post: #2
RE: [CA11] VHF DSC NMEA0183 data to STNG via AIS650?
Welcome to the Raymarine Forum whiteeagle ,

Raymarine's AIS700, AIS650, AIS350, and AIS500 are not designed to support NMEA 0183 to SeaTalkng / NMEA 2000 data bridging. Accordingly, it would be recommended that a NMEA 0183 to SeaTalkng / NMEA 2000 data bridging device supporting DSC and DSE NMEA 0183 sentences (ex. Actisense NGW-1 w/v2.660 software) be installed to support bridging position reports received by the VHF radio.
Find all posts by this user
Quote this message in a reply
12-30-19, 03:49 PM
Post: #3
RE: [CA11] VHF DSC NMEA0183 data to STNG via AIS650?
Thank you for your quick reply.
Find all posts by this user
Quote this message in a reply
12-30-19, 03:53 PM
Post: #4
RE: [CA11] VHF DSC NMEA0183 data to STNG via AIS650?
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)