Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Which transducer
01-02-20, 06:09 PM (This post was last modified: 01-03-20 11:02 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Which transducer
My current set up is two E-120 mfd networked. I have two transducers, both thru hull, one for speed, and one for depth. Transducers are aprox 1.5 in diameter by 4 in long. My there a transducer available that would give me fish finder function ? I have seen several that now combine speed depth and temp in a single unit.
Find all posts by this user
Quote this message in a reply
01-03-20, 11:53 AM
Post: #2
RE: [CA11] Which transducer
Welcome to the Raymarine Forum skip624,

Please click here to view a FAQ addressing this subject. As inferred within the referenced FAQ, fishfinder features may not be added to the MFD simply by interfacing it to a transducer. Additionally, should you identify the model of instrument depth transducer which is presently interfaced to the instruments, then it may be possible to identify a CP370 compatible fishfinder transducer which may be installed within the [censored] in the hull created to accommodate the currently installed transducer.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)