[TG] [TG11] SeaTalk1 to NMEA 2000

[nsmi]

Thanks, I had those reversed.

I'm adding a transceiver and it has NMEA 2000 along with NMEA 0183 at both 38,400 and 4800.

Using the Seatalk converter will the NMEA 2000 output reach the C80?

If I need to use the NMEA 0183 can I connect with the 38,400 baud rate at the input on the Autopilot that will l allow it back to the C80?

(01-20-20 06:57 PM)Tom - Raymarine - Moderator Wrote:  ...you will need a multi-speed NMEA0183 multiplexer in order to be able to get AIS data into the C80 at the required 38,400 baud rate and still get standard 4800 NMEA0183 to the VHF (the Classic displays have only a single comms