Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 interface to ST60 instruments
01-07-20, 09:01 AM
Post: #2
RE: [CA11] Axiom 9 interface to ST60 instruments
Welcome back to the Raymarine Forum Kirk,

A SeaTalk to SeaTalkng Converter Kit would generally be used to support integration of legacy products with the current generation of equipment. However, while ST4000+/ST5000+ autopilots and ST60 instruments are supported for use with a SeaTalk to SeaTalkng Converter, ST4000/ST5000 autopilot are not supported for use with a SeaTalk to SeaTalkng Converter. It is typically recommended that a NMEA 0183 to NMEA 2000 data bridging device (ex. Actisense NGW-1-ISO-STNG, etc.) be used to interface the ST4000/ST5000 generation of autopilots to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone to which the Axiom MFD will also be interfaced as a spur. The aforementioned SeaTalk to SeaTalkng Converter will be installed as a backbone component of the SeaTalkng / NMEA 2000 backbone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 9 interface to ST60 instruments - Chuck - Raymarine - Moderator - 01-07-20 09:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)