Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Axiom 9 interface to ST60 instruments

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 interface to ST60 instruments
01-07-20, 04:49 PM (This post was last modified: 01-07-20 04:53 PM by Chuck - Raymarine - Moderator.)
Post: #3
Captain Kirk Offline
Junior Member
**
 		Posts: 20
Joined: Dec 2019
Reputation: 0
RE: [CA11] Axiom 9 interface to ST60 instruments
Chuck, Thanks very much for your reply!
I have since been to the boat and can update the information re: existing install. I have attached a diagram. As you can see, the autopilot is in fact an ST6001+ and the course computer is a 150G AST.

Q1: with this new information can you recommend the best and hopefully the simplest way to add the Axiom 9. All 3 instruments are mounted at the helm and a new NavPod will be added to house the Axiom also at the helm. The 150G is below deck and within 12 feet (cable length) of the helm.

Thanks very much!
Kirk


Attached File(s)
.pdf  Existing Network Arrangement.pdf (Size: 565.97 KB / Downloads: 628)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 9 interface to ST60 instruments - Captain Kirk - 01-07-20 04:49 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication