Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Axiom 9 interface to ST60 instruments

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 interface to ST60 instruments
01-19-20, 04:32 PM (This post was last modified: 01-20-20 08:22 AM by Chuck - Raymarine - Moderator.)
Post: #13
Captain Kirk Offline
Junior Member
**
 		Posts: 20
Joined: Dec 2019
Reputation: 0
RE: [CA11] Axiom 9 interface to ST60 instruments
Hi again Chuck.... and thanks again for all your support. Questions:

1)Can the 150G/ST6001+ be controlled from the Axiom? I have everything connected and it seems to be communicating e.g) autopilot parameters are available on the sidebar. I wasn't able to activate the Pilot control and I don't have a Pilot icon showing so I'm wondering if I will only have control from ST6001+.

2)Will the pilot be able to follow a route automatically?

I haven't done any sea trials yet.

Kirk
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 9 interface to ST60 instruments - Captain Kirk - 01-19-20 04:32 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication