Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Axiom 9 interface to ST60 instruments

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 interface to ST60 instruments
01-21-20, 11:35 AM
Post: #14
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom 9 interface to ST60 instruments
Kirk,

Q1. Can the 150G/ST6001+ be controlled from the Axiom? I have everything connected and it seems to be communicating e.g) autopilot parameters are available on the sidebar. I wasn't able to activate the Pilot control and I don't have a Pilot icon showing so I'm wondering if I will only have control from ST6001+.
A1. Please click here to view a FAQ addressing this subject.

Q2. Will the pilot be able to follow a route automatically?
A2. This question is also addressed within the FAQ referenced in my response to Q1.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 9 interface to ST60 instruments - Chuck - Raymarine - Moderator - 01-21-20 11:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication