Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro 12 not recognizing StNG autopilot
01-09-20, 03:46 AM (This post was last modified: 01-09-20 10:55 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom Pro 12 not recognizing StNG autopilot
After upgrading to Axiom Pro 12, the SPx30 is not accessible any longer from the MFD, while it is listed on the devices list and also the messages are received, the autopilot functions are greyed out. GoTo cursor, GoTo waypoint, follow route no longer possible.
Find all posts by this user
Quote this message in a reply
01-09-20, 10:55 AM (This post was last modified: 01-09-20 10:57 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Axiom Pro 12 not recognizing StNG autopilot
Welcome to the Raymarine Forum John,

As indicated therein, these actions are possible, but will require that the autopilot's control head be used to command the autopilot into track mode after having commanded the Go To or Follow Route command. Please click here to view a FAQ addressing this subject. As indicated therein, these actions are possible, but will require that the autopilot's control head be used to command the autopilot into track mode after having commanded the Go To or Follow Route command.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)