Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] ST6000 Control Unit Upgrade
01-12-20, 01:40 AM (This post was last modified: 01-13-20 04:37 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ST6000 Control Unit Upgrade
Hello,

My Raymarine ST6000 autopilot works well, except for the display has recently become a little glitchy. Is it possible to upgrade just the control unit and leave the rest of the system in place?

If so, will I have the newer NMEA 2k capability?

Thanks for your time.

Brian
Find all posts by this user
Quote this message in a reply
01-14-20, 01:18 PM (This post was last modified: 01-14-20 01:31 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] ST6000 Control Unit Upgrade
Welcome to the Raymarine Forum Brian,

The p70S/p70RS/p70/p70R autopilot control heads, i70S/i70 MFIDs, and i50/i60 instruments, and i70S/i70 MFIDs are not designed to functions SeaTalk to SeaTalkng/NMEA 2000 data bridging devices. Accordingly, alone, they would do nothing to add NMEA 2000 interfacing / compatibility to the system. Compatibility with your currently installed autopilot course computer is dependent upon the model of autopilot course computer which the ST6000 autopilot control head has been interfaced to. Please click here to view a FAQ addressing this subject. When used with autopilot course computer designs preceding Raymarine's SPX autopilots, the p70S/p70RS/p70/p70R autopilot control head must be directly connected to the autopilot course computer's SeaTalk port or to a SeaTalk1 bus which in turn has been directly connected to the autopilot course computer's SeaTalk port.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)