Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Split Transducer Signal Furuno and Axiom
01-13-20, 08:08 PM (This post was last modified: 01-14-20 10:25 PM by Tom - Raymarine - Moderator.)
Post: #1
Split Transducer Signal Furuno and Axiom
We have a Furuno FCV-295 with Airmar R109C-LH transducer. Also have an Axiom 12. Is there any possibility to split the transducer signal for both the Furuno and Axiom?
Find all posts by this user
Quote this message in a reply
01-14-20, 10:31 PM
Post: #2
RE: Split Transducer Signal Furuno and Axiom
Hello XandeGuedes,

No, don't try to do this. It won't work and you will destroy the sounders by each putting something over 1000Vp-p into the other's receiver when it transmits.

If there were an industry-standard language for sharing sounder data (analogous to NMEA2000 but for high-bandwidth graphical data) then that might allow the sharing of the sounder image, but at this stage there is no such protocol.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)