Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS 700 data to VHF transceiver
01-17-20, 04:17 PM (This post was last modified: 01-19-20 07:19 PM by Tom - Raymarine - Moderator.)
Post: #1
AIS 700 data to VHF transceiver
What data is transferred from AIS 700 and does it support latitude and longitude that can be used on VHF Transceivers
Find all posts by this user
Quote this message in a reply
01-19-20, 07:22 PM
Post: #2
RE: AIS 700 data to VHF transceiver
Hello Grayson,

Raymarine AIS transceivers don't output position data by default. It is possible to enable output via NMEA0183 in the ProAIS2 software but we recommend not doing so, in part because this GPS source doesn't take part in our 'multiple data source selection' process. We would always recommend using a dedicated navigational GPS receiver.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)