[CA11] AIS to a78

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] AIS to a78

01-22-20, 08:07 PM (This post was last modified: 01-23-20 11:21 AM by Chuck - Raymarine - Moderator.)

Post: #1

Greyharbor Offline

Junior Member

Posts: 12
Joined: Feb 2019
Reputation: 0

[CA11] AIS to a78

I use the wires from my AxiomPro RVX power cable to connect to my AIS via NMEA0183. The A78 which I use to view my charts and run my older Lighthouse II software autopilot does not have NMEA input cables on the power cord I discovered. My AxiomPro and a78 will not resolve data master. The a78 will not read the AxiomPro has data master.

I therefore cannot view the AIS data on the a78 which shows on the AxiomPro through the NMEA0183 connectors.

Is there a way to resolve this?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] AIS to a78 - Greyharbor - 01-22-20 08:07 PM

RE: [CA11] AIS to a78 - Chuck - Raymarine - Moderator - 01-23-20, 11:27 AM

RE: [CA11] AIS to a78 - Greyharbor - 01-23-20, 11:44 AM

RE: [CA11] AIS to a78 - Chuck - Raymarine - Moderator - 01-23-20, 11:53 AM

User(s) browsing this thread: 1 Guest(s)