Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom versus a78, stalemate
01-23-20, 11:47 AM (This post was last modified: 01-23-20 01:43 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom versus a78, stalemate
My AxiomPro and a78 will not resolve data master. The a78 will not read the AxiomPro as data master. Is there a way to force the a78 to be the "slave" of the AxiomPro so I can share display information from the AxiomPro 12 RVX?
Find all posts by this user
Quote this message in a reply
01-23-20, 01:57 PM (This post was last modified: 01-23-20 01:57 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Axiom versus a78, stalemate
Welcome to the Raymarine Forum Greyharbor,

Please click here to view a FAQ addressing this subject. As indicated therein, a-Series MFDs (a member of the legacy a/c/e-Series MFD family) cannot be interfaced via Ethernet communications to a MFD running LightHouse 3 software (i.e. Axiom/Axiom Pro/Axiom XL MFDs). As indicated therein the a-Series MFD may alternatively be interfaced to the same backbone as is the Axiom Pro MFD ... however, data sharing will be limited to that specified within the referenced FAQ.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)