Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] a78
01-23-20, 03:43 PM (This post was last modified: 01-23-20 04:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] a78
Can the a78 simultaneously read input from the network NMEA2000 port and input from the Seatalk port and not result in interference?
Find all posts by this user
Quote this message in a reply
01-23-20, 04:24 PM
Post: #2
RE: [CA11] a78
Welcome back to the Raymarine Forum ,

Q. Can the a78 simultaneously read input from the network NMEA2000 port and input from the Seatalk port and not result in interference?
A. I believe that this question is invalid, as a-Series MFDs do not have a SeaTalk port. The 6" and 7" a-Series MFDs feature the following communications interfaces:
- Ethernet (RayNet/SeaTalkhs)
- SeaTalkng/NMEA 2000
- Bluetooth
- WiFi (only on WiFi equipped versions of the 6" and 7" a-Series MFDs

The a-Series MFDs are designed to simultaneously support use of each of its communications interfaces.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)