Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Axiom 7 NMEA 2000 Engine Hours
01-23-20, 08:23 PM (This post was last modified: 01-24-20 11:54 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Axiom 7 NMEA 2000 Engine Hours

I have a single engine Volvo Penta D1-30 engine with a Yacht Devices YDEG-04 gateway installed in-line with an EVC tachometer - and connected to my NMEA 2000 network.

With this implementation I am able to display the engine RPM on the Engine page of the MFD.

When I try to customise this page to show engine hours by editing an existing data item - I am not presented with an option to show Engine Hours.

Can you confirm whether I should see this option? And what action I can take to access this information?

Find all posts by this user
Quote this message in a reply
01-28-20, 08:25 PM
Post: #2
RE: [TG11] Axiom 7 NMEA 2000 Engine Hours

Yes, Engine Hours should be an option, as long as the existing item you're trying to change is a digital field. You can't put engine hours in place of, for example, the fuel level or trim tab bars but can in place of a digital item such as battery voltage or SOG.
If you're still having trouble perhaps you could post a screenshot/photo of your current page layout and the data item you're trying to customise, and the contents of the Select Engine Data page? Also, it would be good to know what software version you're running (Home > Getting Started, latest version is v3.11.42.)


Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)