Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Airmar B66VL to DSM30
02-01-20, 11:00 AM (This post was last modified: 02-03-20 04:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Airmar B66VL to DSM30
Hi,
I have an Airmar B66VL (Raymarine 78918) which has 2 connectors on it. I would like to connect this to my DSM30. I was told I need a "Y" adapter to do this? DO you have a part number from Raymarine that I need to order?

Thanks in advance
Bill
Find all posts by this user
Quote this message in a reply
02-03-20, 04:08 PM
Post: #2
RE: [CA11] Airmar B66VL to DSM30
Welcome to the Raymarine Forum Bill,

It appears that you have been incorrectly advised. The M78918 is a version of the B744VL which was designed to be mated to a ST50 instrument. As indicated within the FAQ found here, instrument transducers cannot be adapted to support the fishfinder application features of a MFD or fishfinder sounder module. The last version of the B744VL which Raymarine had sold which had been designed for use with a DSM30/300/250 had the part #A66092. If considering use of the DSM30 with your system, then it would be recommended that the A66092 variant of the B744VL transducer be used.
Find all posts by this user
Quote this message in a reply
02-04-20, 05:50 AM
Post: #3
RE: [CA11] Airmar B66VL to DSM30
thanks Chuck for getting back to me on this! Much appreciated
Find all posts by this user
Quote this message in a reply
02-04-20, 08:27 AM
Post: #4
RE: [CA11] Airmar B66VL to DSM30
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)