Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raymarine Axiom Waypoints wont load
02-05-20, 03:41 PM (This post was last modified: 02-05-20 04:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Raymarine Axiom Waypoints wont load
I have a raymarine Axiom chartplotter with the latest Lighthouse update. I have followed all of the constraint requirements. Can anyone take a look at the .gpx file and see if there is anything wrong with it. These are all public numbers.


Attached File(s)
.gpx  20200205123339-43002-data.gpx (Size: 121.63 KB / Downloads: 179)
Find all posts by this user
Quote this message in a reply
02-06-20, 08:08 AM
Post: #2
RE: [CA11] Raymarine Axiom Waypoints wont load
Welcome to the Raymarine Forum FluidDynamic,

I imported the GPX file which you had provided into GPS Utility to permit me to do a quick inspection of the names and comments, as well as to permit me to list them by name to find possible duplicates ... none were found. From within GPS Utility, I chose the Save As option (without any modifications) save the data to a new file name ... test.gpx. I then attempted to import test.gpx within an Axiom MFD running LH3 v3.11.42 and the data imported successfully.


Attached File(s)
.gpx  test.gpx (Size: 135.24 KB / Downloads: 138)
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)