Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] a95 to Axiom 9 upgrade
02-04-20, 03:44 PM
Post: #2
RE: [CA11] a95 to Axiom 9 upgrade
Welcome back to the Raymarine Forum wingman,

Please click here to view a FAQ addressing this subject. Of the Raymarine products listed (except for the a95 MFD), all of these products are compatible with an Axiom MFD. If simply seeking to supply the VHF radio with GPS data, then the E70196 VHF NMEA 0183 to STng Converter Kit may be added to the backbone to support this end. Alternatively, an Actisense NGW-1-ISO may be installed between the VHF radio and a spur socket within the backbone to additionally permit DSC position reports received by the VHF radio to be available to the Axiom MFD. As the Garmin GPSMap 421 appears to have a NMEA 2000 communications interface, it to should be capable of being interfaced as a spur to the backbone. Please note that radar, fishfinder, and cartography resources cannot be share between Raymarine and third party products.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] a95 to Axiom 9 upgrade - wingman - 02-04-20, 02:03 PM
RE: [CA11] a95 to Axiom 9 upgrade - Chuck - Raymarine - Moderator - 02-04-20 03:44 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)