Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] a95 to Axiom 9 upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] a95 to Axiom 9 upgrade
02-07-20, 11:28 AM (This post was last modified: 02-07-20 11:34 AM by Chuck - Raymarine - Moderator.)
Post: #3
wingman Offline
Junior Member
**
 		Posts: 8
Joined: Jan 2020
Reputation: 0
RE: [CA11] a95 to Axiom 9 upgrade
Thanks for the advice. A couple more questions related to current configuration of system and what will need to be changed to accept the Axiom.

If I understand the FAQs correctly, the power supply cable/connector will have to be changed to go from the a95 to the Axiom (0183 to nmea2000). Are adapters available?

It also looks like the Axiom does not have a STng input. Is that correct?

The currently installed a95 is connected to the p70 via STng ports/cables.
Can the Axiom be connected to the p70 via an adapter cable?

The currently installed a95 also has a network input (not sure where that is coming from yet). Can this input go to the Axiom network port?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] a95 to Axiom 9 upgrade - wingman - 02-04-20, 02:03 PM
RE: [CA11] a95 to Axiom 9 upgrade - wingman - 02-07-20 11:28 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication