Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Testing linear rudder transducer m81188
02-06-20, 08:48 AM (This post was last modified: 02-06-20 02:54 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Testing linear rudder transducer m81188
Hello. Im having a no rudref message on my st6002. I am suspecting my m81188 linear rudder sensor. Wiring is good from the sensor to the board. I cant find any spec on how to test the rudder itself. Do i use the same resistance spec as a rotative rudder sensor ?
Find all posts by this user
Quote this message in a reply
02-06-20, 02:56 PM
Post: #2
RE: [CA11] Testing linear rudder transducer m81188
Welcome to the Raymarine Forum Simon,

Q. I cant find any spec on how to test the rudder itself. Do i use the same resistance spec as a rotative rudder sensor ?
A. Yes. Please click here to view a FAQ addressing the subject of how to test a rudder reference transducer.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-07-20, 11:15 AM
Post: #3
RE: [CA11] Testing linear rudder transducer m81188
Thank for your help. I did the test ; and transducer is not within specs. Since the m81188 seems to be no longer available, is there another part that would be a direct fit to replace it ?
Find all posts by this user
Quote this message in a reply
02-07-20, 11:27 AM
Post: #4
RE: [CA11] Testing linear rudder transducer m81188
Simon30,

As you may be aware Raymarine only manufactures and sells rotary rudder reference transducers today. Those seeking a linear rudder reference transducers are generally recommended to consider the Seastar (Teleflex) AR4502RM Smartstick Rudder Reference Transducer..
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)