Raymarine forum / Raymarine Forums / Multifunction Displays v / C70

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C70
06-06-16, 02:48 PM (This post was last modified: 06-06-16 03:41 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: C70
Welcome to the Raymarine Forum Rich,

It is recommended that the C-Series Classic MFD's (C70, C80, C120) power cable be unplugged and that the loaded system voltage be measured at the plug to ensure that it is within the operating range of the MFD (10.7-32.0 VDC). If so, then the MFD would be deemed to have suffered an internal failure necessitating that it be serviced by Raymarine’s Product Repair Center.

A C70 MFD would typically be replaced with an a95 or eS95 MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
C70 - WWMS - 06-06-16, 02:24 PM
RE: C70 - Chuck - Raymarine - Moderator - 06-06-16 02:48 PM
RE: C70 - WWMS - 06-06-16, 04:24 PM
RE: C70 - Chuck - Raymarine - Moderator - 06-07-16, 08:09 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication