Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Hooking up my 200 Verado I4 to a Axiom 9RV
02-20-20, 11:49 AM (This post was last modified: 02-20-20 02:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Hooking up my 200 Verado I4 to a Axiom 9RV
Can anyone tell me what parts I'll need to hook my 2011 Mercury Verado 200 I4 to my new Axiom 9 RV? I currently have Smartcraft gauges at the helm. Thanks in advance!
Find all posts by this user
Quote this message in a reply
02-20-20, 02:25 PM
Post: #2
RE: [CA11] Hooking up my 200 Verado I4 to a Axiom 9RV
Welcome to the Raymarine Forum Motorboater222,

Please click here to view a FAQ addressing this subject. As suggested within the referenced FAQ, a SmartCraft to NMEA 2000 Engine Gateway will be installed between SmartCraft backbone and the powered and properly terminated SeaTalkng / NMEA 2000 marine electronics backbone to which the MFD will be interfaced as a spur.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-20-20, 04:37 PM (This post was last modified: 02-21-20 09:46 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Hooking up my 200 Verado I4 to a Axiom 9RV
Thanks!!!
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)