The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] AirMar Ultrasonic Temp/depth wiring

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AirMar Ultrasonic Temp/depth wiring
02-24-20, 09:10 PM (This post was last modified: 02-25-20 10:15 AM by Chuck - Raymarine - Moderator.)
Post: #1
riclevitt Offline
Junior Member
**
 		Posts: 11
Joined: Mar 2016
Reputation: 0
[CA11] AirMar Ultrasonic Temp/depth wiring
My current system includes i70 displays, E75 multifunction, st60wind, p70autopilot and legacy st80 multifuntion displays connected through st/nt adapter.
Everything works great. I would like to replace my paddlewheel airmar speed/temp with their newer ultrasonic Multilog Sensor which has an NMEA 2000 output model.
Current speed/temp and depth sensors connect through old st80 pod.
The sensor housings should be compatible.
Question is should I wire new sensors to st80pod or wire direct to my new style backbone ?
also, will I need an adapter to connect and will the st80 displays still be able to function without going through the pod.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] AirMar Ultrasonic Temp/depth wiring - riclevitt - 02-24-20 09:10 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication