Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Updating NMEA2000 electronics using Axiom MFD
05-13-20, 01:08 AM (This post was last modified: 05-14-20 10:38 PM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] Updating NMEA2000 electronics using Axiom MFD
Is it possible to update other marine electronics that exist on the NMEA2000 system using the SD port on my Axiom 12? As an example I inherited with my boat another manufacturers GPS antenna which requires a software update but has no sd card port of course to resolve date issues on the MFD. Thanks for any advise.
Find all posts by this user
Quote this message in a reply
05-14-20, 10:45 PM
Post: #2
RE: [TG11] Updating NMEA2000 electronics using Axiom MFD
Hello Ronj31,

As I mentioned in my answer to your other question, no, sorry, this isn't possible.

Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)