[TG11] Multi function display problem

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Multi function display problem

02-27-20, 01:06 AM (This post was last modified: 02-28-20 09:18 AM by Chuck - Raymarine - Moderator.)

Post: #2

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] Multi function display problem

Hello David,

At 6 years old that sounds like it's probably the 3rd-generation e-Series (touchscreen, no buttons along the bottom edge of the LCD: e7, e7D, e95, e97, e125 or e127.) The sort of problem isn't common in that generation of display, but it sounds like you might perhaps have a poor contact between the CPU board and the LCD module, or a CPU board fault. Where is the boat? That will give us an idea what to suggest.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Multi function display problem - david.wright811 - 02-26-20, 07:18 PM

RE: [TG11] Multi function display problem - Tom - Raymarine - Moderator - 02-27-20 01:06 AM

RE: [TG11] Multi function display problem - david.wright811 - 02-28-20, 09:15 AM

RE: [TG11] Multi function display problem - Tom - Raymarine - Moderator - 03-02-20, 09:59 PM

RE: [TG11] Multi function display problem - david.wright811 - 03-03-20, 02:20 AM

User(s) browsing this thread: 1 Guest(s)