Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] i50 DEPTH, salt water inside
02-26-20, 08:23 PM (This post was last modified: 02-27-20 10:20 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] i50 DEPTH, salt water inside
Start to fail during Punta del Este Rolex Cup Uruguay, few day later it does not turn on, i have to go back to Argentina and sail into De la Plata river, its to shalow to go whitout depth instrument, so i disasemble and this ar the photos...
http://forum.raymarine.com/attachment.php?aid=4174
http://forum.raymarine.com/attachment.php?aid=4175
Find all posts by this user
Quote this message in a reply
02-27-20, 10:22 AM
Post: #2
RE: [CA11] i50 DEPTH, salt water inside
Welcome to the Raymarine Forum Ficob,

Unfortunately, it appears that the seal of your i50 Depth instrument has failed, resulting in either condensation or water infiltration and the subsequent corrosion. It is recommended that your authorized Raymarine dealer be contacted to service the instrument or that it be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)