Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST69 / CP470 / ES127
02-27-20, 12:06 PM (This post was last modified: 02-27-20 12:30 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ST69 / CP470 / ES127
I have a ES 127 on my boat and now have the CP 470 and a M265 Chirp transducer hooked up. I have the M265 and ST69 connected via a Raymarine Y cable to the CP470. How do I get the ES 127 to recognize the ST69. Thank you
Find all posts by this user
Quote this message in a reply
02-27-20, 01:33 PM
Post: #2
RE: [CA11] ST69 / CP470 / ES127
Welcome to the Raymarine Forum RKW68,

Are you seeking to address a situation where the Water Temp data item and/or Speed (STW) data item is reporting "-.-" for a value or are you seeking information concerning how to display the Water Temp data item? What version of software is installed within the eS127 MFD?
Find all posts by this user
Quote this message in a reply
03-10-20, 12:31 PM (This post was last modified: 03-10-20 12:35 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] ST69 / CP470 / ES127
I want to display it and version 19.?
Find all posts by this user
Quote this message in a reply
03-10-20, 12:37 PM
Post: #4
RE: [CA11] ST69 / CP470 / ES127
RKW68,

Q. I want to display it and version 19.?
A. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)