Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] LightHouse NC2 North America
12-16-19, 12:44 PM (This post was last modified: 12-17-19 02:53 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] LightHouse NC2 North America
I have LightHouse NC2 North America chart card Published: 04/18/2019. I am unable to hide fishing hot spots on the chart. Clicking on the 3 lines in the upper right, opens up a menu on the right side. If I click on SIMPLE or DETAILED or FISHING CHART it always shows the fishing hot spots. Is there another way to hide the fishing hot spots when I am not fishing?

I have attached a picture showing the menu I am using. I also have a video if it helps.

This is on a Axiom 9 RV E70367 with Software Version 3.11.42.
Find all posts by this user
Quote this message in a reply
12-17-19, 03:05 PM
Post: #2
RE: [CA11] LightHouse NC2 North America
Welcome back to the Raymarine Forum Family Tides,

The icon which you have identified is referred to as a Marked Fishing Area (MFA). These objects were intended to be hidden or shown via the Marine Features Advanced Chart setting (SETTINGS->ADVANCED->MARINE FEATURES). However, upon determining which setting was responsible for hiding MFAs, it was determined that this setting is inadvertently hiding the island as well. A problem report will be logged to address this issue within a future LightHouse 3 software update.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)