Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Connect AIS500 to E95
03-07-20, 01:00 PM (This post was last modified: 03-09-20 09:07 AM by Chuck - Raymarine - Moderator.)
Post: #7
RE: [LW11] Connect AIS500 to E95
The MFD and AIS now communicate and I see the boat on MarineTraffic. So GPS and VHF function all appear to be working fine. Within Diagnose I see a lot of Transmits from MFD to AIS but very few Receives. The status bar underneath the screen doesn’t show the AIS. The symbol is of AIS not connected or shutdown.

I’ve spend now 3 Saturday’s on board to get the things working. No idea anymore what I do wrong. Took de unit AIS back home again and will try to connect is to my PC. Any idea if I can run a diagnose with the ProAIS software?

What else can I do?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Connect AIS500 to E95 - Marien - 02-29-20, 09:16 AM
RE: [LW11] Connect AIS500 to E95 - Marien - 03-07-20 01:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)