Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Changing Engine Date parameters ES127
03-10-20, 03:13 PM (This post was last modified: 03-10-20 03:35 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] Changing Engine Date parameters ES127
BCI,

Was the vessel equipped with a digital switching system? If not, then engine red line and RPM range may be configured by:
1) opening the Data application
2) scrolling through the Data application's panels to view the Engine panel
3) command the Max RPM Range (MENU->DATA SET-UP->MAX RPM RANGE) to match that of the engines
4) command the RPM Red Zone (MENU->DATA SET-UP->RPM RED ZONE->MANUAL) to match that of the engine red zone
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Changing Engine Date parameters ES127 - Chuck - Raymarine - Moderator - 03-10-20 03:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)