Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
06-22-20, 01:59 PM
Post: #32
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
You will use either cable # A80674(STNG backbone to DV male) or #A80675(STNG to DV Female) to connect the E22158 to the NMEA2000 backbone. Make sure to remove the terminator on the NMEA2000 and then plug one of the above cables in.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter - Chris - Raymarine - Moderator - 06-22-20 01:59 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)