Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
12-21-16, 03:05 PM
Post: #17
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
brewgyver,

The SeaTalk to SeaTalkng Converter included with the E70196 VHF NMEA 0183 to STng Converter Kit is identical to that included with the E22158 SeaTalk to SeaTalkng Converter Kit. An A22164 SeaTalkng Converter Cable would be used to mate the SeaTalkng Converter the SeaTalk port of the ST4000+ or to a D244 SeaTalk Junction Block. Using an appropriate length of SeaTalk Cable having press-fit female plugs on each end, the D244 SeaTalk Junction block would then be interfaced to the SeaTalk bus to which the ST4000+ and any other devices having a SeaTalk communications interface have been networked. See my last response regarding cutting and then re-splicing the SeaTalk cable which will be connected to the autopilot's SeaTalk port.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter - Chuck - Raymarine - Moderator - 12-21-16 03:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)