Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Radar Mounts
03-04-20, 01:22 PM (This post was last modified: 03-04-20 02:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Radar Mounts
Is there any reason not to use a Scanstrut LMM-1 self-leveling radar mount with the Quantum 2? It looks like the [censored] patterns and distances are the same and that there is room for the radome in the throat of the mount. And, Scanstrut claims it will fit. Looking for a Raymarine response before I buy the Quantum 2. Thank you.
Find all posts by this user
Quote this message in a reply
03-04-20, 02:26 PM (This post was last modified: 03-04-20 02:29 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Radar Mounts
Welcome to the Raymarine Forum Jim,

It is certainly possible to utilize a self-leveling mount with a Quantum 2 radome. According to the information on ScanStrut's website, it appears that ScanStrut's Plate #1 option matches the bolt pattern of Raymarine's Quantum/Quantum 2 radomes. Questions regarding whether the Quantum/Quantum 2 radome (they use the same shell) will fit the mount should be addressed to ScanStrut (or other mount manufacturer), as Raymarine does not test third party mounting products.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)