Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo
04-28-20, 10:29 AM
Post: #9
RE: [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo
Hi Chuck,

I thought I would tap your expertise with the following issue I’m currently having:

I’m replacing my original, 2008, Raymarine radar (with the really thick white cable that carries power, NMEA0183, etc) with the new T70417 Quantum Doppler radar which contains 2 cables (power and data, A80275 for the data).

Is there a known cable gland to Raymarine that you recommend to use for passing these 2 cables through a deck or must I drill a new [censored] for the second cable? My current set up has scanstrut cable glands for each individual mast cable/wire. I’m certain I’m not the first to come across this issue and wanted to know if this had been solved? My forum keyword searches did not turn anything up.

Thanks in advance.

Brian
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo - sv_atlas - 04-28-20 10:29 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)